This is a RIB-less programming set, so that no Radio Interface Box (RIB) is needed, no power supply being required. Simply hook it up to USB port. This programming kit is not a straight forward cable, there is an internal converter circuit board mounted in an USB plug. This programming cable comes wiith USB drivers, it provides quick and easy programming of the following Kenwood radios: TK-7150, TK-7160, TK-7180, TK-760, TK-760G, TK-762, TK-762G, TK-763, TK-763G, TK-768, TK-768G, TK-780, TK-780G, TK-785, TK-8150, TK-8160, TK-8180, TK-860, TK-860G, TK-862, TK-862G, TK-863, TK-863G, TK-868, TK-868G, TK-880, TK-880G, TK-885, TK-980, TK-981, TKR-730, TKR-740, TKR-750, TKR-830, TKR-850, TM-261A, TM-271A, TM-461A, TM-471A.
You will find that when you purchase our programming cable you will possibly never need to replace it. This cable is extensively tested at time of manufacture to be free of defects. This cable does not include any manuals or instructions for use.
Our main products are battery packs, Battery Eliminators, battery charger, earphones, Speaks Microphones, Housing, Carry Cases, Antenna, Programming Test Cable.They are suitable to famous Two-Way Radios, such as MOTOROLA, KENWOOD, Yaesu/VETEX, ICOM, TAIT, KYODO, MAXON, UNIDEN, and so on
Other Programming/INTERFACE Cable:
Mag One A8
HKN9857A
HKN9857A
PMKN4004A
PMKN4004A
RKN4083
RKN4074A
JMKN4123
VISAR
RTK4203C
RKN4035D
RLN4008B
HKN4137A
HLN9073
Cloning Cable
KPG-22
KPG-4
KPG-46
KGP-36
PG-2N
PG-3N
PG-4N
VX160
OPC-478
OPC-966
OPC-1132
Cloning Cable
TC-268
TC-500
